|
Reports for a NCCI-type
calculation |
| 3-Year Non-ERA Premium Cost of Small Losses |
One-year, two-year and three-year costs of losses are estimated
for various small loss amounts based on the manual premium you
indicated on the Company Setup page. This report is intended for
calculations in which ERA did not apply, so no cost estimates
for medical-only losses are shown.
|
| 3- Year Premium Cost of Small Losses |
One-year, two-year and three-year costs of losses are estimated
for various small loss amounts based on the manual premium you
indicated on the Company Setup page. This report is intended for
calculations in which ERA applied, so cost estimates for
medical-only losses are also shown.
|
| 3- Year Premium Cost of Various Losses |
One-year, two-year and three-year costs of losses are estimated
for various loss amounts based on the manual premium you
indicated on the Company Setup page.
|
| Aggregate Loss Sensitivity Analysis
|
Shows how variations in total aggregate losses would affect the mod.
|
| Bureau-Type Report
|
Detail and summary information presented in the familiar bureau worksheet format.
|
| Bureau-Type Report (pre-1998) |
Detail and summary information presented in the familiar bureau worksheet format.
|
| Cause of Loss Graph |
How the most common groupings by cause of loss (such as 'failure
to follow procedure' or 'repetitive motion injury') contributed to the mod.
|
|
Cause of Loss Report |
How each grouping by cause of loss (such as 'failure to follow
procedure' or 'repetitive motion injury') contributed to the
mod. |
| Cause of Loss and Premium Analysis Report |
This report is similar to the existing cause of loss reports, but also includes 1 and 3 year premium costs by cause of loss. |
| Combined Mod/ARAP Impact on Premium Report |
Shows the estimated premium and premium savings based on combined mod
and ARAP values. This report is primarily for users doing Massachusetts calculation, where the ARAP, if greater than 1, always impacts the premium |
| Detailed Report |
All input data, limitations applied, summaries by state, and
overall calculation summaries. |
|
ERM-6 Report |
Payroll and loss information in the ERM-6 format for self-insureds
to submit data to NCCI. Header information for each page is
specified in the Exception Information area of the Company Setup
page. |
|
Injury Type Graph |
Graphically shows the total impact on the mod factor by injury
type. Also shows a table listing the top 10 injury types by
total loss amount.
|
|
Injury Type Report |
Groups losses by injury type and shows the total loss amount and
impact on the mod by injury type. |
|
Large Loss Entry Data Verification |
Large losses in the order they were input. |
|
Loss Identifier Graph |
Graphically shows the total impact on the mod factor by cause of
loss. Also shows a table listing the top 10 causes of loss by
total loss amount. |
| Loss Identifier Report |
Groups losses by loss identifier and shows the total loss amount
and impact on the mod by loss identifier.
|
| Loss Summary Report |
Provides a listing of all losses, indicating the loss type as frequency, severity, or medical-only. Also displays 1-year and 3-year premium estimates based on these losses. |
| Massachusetts Mod/ARAP Impact |
Shows the combined impact of the mod and MA-limited ARAP value on
estimated premium. |
|
Mod Comparison Report |
Contrasting analysis between two mods. Displays expected, actual, primary and excess losses for each mod. Also shows the
impact of these losses to the mod and contains a written description of possible reasons for the changes shown.
This report is intended for use between the most current mod for a risk (the active file) and the prior experience period for
that same risk. Comparisons between files which do not have the same relative policy periods and effective dates may produce
unreliable results.
|
| Mod Impact on Premium Analysis |
Graphically depicts the impact that the mod has on the premium
paid. Also shows the average mod, the minimum mod, and the
controllable mod.
|
| Mod Snapshot |
Shows the most important aspects of the mod calculation and
analysis on a single page. This includes the key values, a
graph of the average mod, the current mod, the minimum mod, and
the controllable mod. An additional graph shows the losses by
policy period
|
| Payroll Entry Data Verification |
Payroll entries in the order they were input.
|
| Payroll Sensitivity Analysis |
Shows how changes in payroll, with the same level of losses, would affect the mod. |
|
Policy Period Loss Analysis
|
Graphically depicts actual vs. expected losses by policy
period. This report helps identify trends in losses and the
relationship between expected and actual losses.
|
|
Ratio Analysis
|
Shows the ratio between actual and expected primary and excess
losses and provides a brief interpretation of the results. |
| Small Loss Entry Data Verification |
Small losses in the order they were input. |
|
Specific Loss Report |
Shows how specific losses affect the mod, what the mod would
have been without the loss, and the one year, two year, and
three year premium cost of the loss.
|
|
Specific Loss Detail Report |
Shows how each large/itemized and small/grouped loss entry affects the mod, what the mod would have been without the loss,
and the one year, two year, and three year premium cost of the loss. Includes Loss Identifier data. |
|
Summary Report
|
One page mod summary showing the key values in the mod
calculation, the mod formula, and how the numbers for this
calculation plug into the mod formula.
|
|
Texas Bureau-Type Report
|
Texas bureau-style report showing detail and summary.
|
|
Top Losses Graph |
Graph of top ten losses in this calculation
and the total impact the loss had on the mod factor. Impact in
terms of premium dollars is also shown if a manual premium
estimate was entered on the Company Setup page. |
| True Cost of Loss Analysis
|
Graphical representation of how losses impact the estimated premium costs and the mod by policy period. |
| WorkCompEdge Proposal Report |
A specialized report for WorkCompEdge Member Agencies providing
a mod summary with possible premium savings. Loss ratios,
controllable mod, and other trends are analyzed to produce a
tailored recommendation of top modules the client should
prioritize when implementing WorkCompEdge recommendations. |
|
Reports for a NJ calculation |
| Loss Analysis by Policy Period |
Shows a graphical analysis of the actual vs. expected losses by policy period. Helps identify trends in losses.
|
| Minimum Mod and Loss Sensitivity |
The NJ minimum mod and loss sensitivity reports shows in a pie
chart and in table format how the minimum mod and each period of
losses affected the final mod.
|
| Mod Impact on Premium Analysis |
Graphically depicts the impact of the mod on the premium. Also shows average, minimum and
controllable mod amounts. |
| NJ Bureau-Type Report |
Detail and summary information presented in the familiar bureau
worksheet format. |
| NJ Detailed Report |
The NJ detail report features a cover page, a payroll and manual
premium subject data report, loss analysis reports on actual
losses and modified losses, and a page showing each value used
or computed in the calculation. |
| NJ Mod Summary |
The NJ summary report highlights the payroll and manual premium
subject totals, the actual incurred and modified losses, and the
risk summary data for the calculation. |
| Specific Loss Report |
The NJ Specific Loss Sensitivity Analysis shows medical and indemnity amounts, the impact on the mod, and the one, two and
three-year cost of premiums generated for each itemized loss and
group of minor losses. |
| Reports for a PA/DE calculation |
| Bureau-Type Report |
Detail and summary information presented in the familiar bureau worksheet format.
|
| Detailed Report |
The PA/DE detail report includes a cover page, payroll and expected loss factors and values, a loss analysis of Part I and
Part II losses, and a summary page which highlights expected losses, actual losses, and computed factors. |
| Expected Losses by Policy Period |
The PA/DE Policy Period Expected Loss Analysis shows in a pie
chart and in table format how Part I losses as used affected the
expected losses for each year in the calculation. |
| Loss Analysis by Policy Period |
The PA/DE Expected Loss Analysis shows in a bar chart and in table format how Part I losses as used compared to expected
losses for each year in the calculation.
|
| Minimum Mod and Loss Sensitivity |
The PA/DE Minimum Mod and Loss Sensitivity report shows in a pie
chart and in table format how Part I and Part II losses respectively impacted the mod. It also show the value of the minimum mod. |
| Mod & Premium Cost Analysis |
One page mod summary showing the key values in the mod
calculation, the mod formula, and what the minimum mod tells you about loss control opportunities. |
| Mod Summary |
The PA/DE summary highlights expected losses, actual losses, and
computed factors for the calculation. |
